From desai@gravity.psu.edu Sat Mar 8 19:41:37 2008 Date: Sat, 8 Mar 2008 19:41:34 -0500 (EST) From: Shantanu Desai To: Keith Riles , Gabriela Gonzalez , John Zweizig Subject: Updated RBS L1 DQ flag (RAILED_RBS_PZT) Hi Keith et al, I looked at the all the 4 L1 RBS channels suggested by Gaby to check for railed RBS throughout S5 (first from minute trends and then a second pass by rescanning the second trends in the segments containing the intervals for which the first pass revealed saturations). I have attached the list. There is already a L1:RAILED_RBS_PZT flag. So this list should just be an update of this previously existing flag. The good news is that almost all of them were already covered in Gaby's earlier list. My guess is that the intervals currently in RAILED_RBS_PZT contain intervals from minute trends, whereas the list which I have provided contains intervals from second trends and hence there are minor discrepancies. Anyhow I understand that you/John have automated and faster tools to scan the second trends and you could do your own sanity check by looking at the segments containing the currently provided intervals (the only channels which saturate at 10 are L1:IOO-RBS_M1YAW_OUT16 and L1:IOO-RBS_M2YAW_OUT16) to nail it down with more precision. Let me know if there are more questions on these or if you see any other discrepancies between Gaby's original list and the current one. Thanks Shantanu [ Part 2, "" Text/PLAIN (Name: "L1rbsdq") 6 lines. ] [ Unable to print this part. ]